Dual Axis-solar Radiation Tracking (DART) Racking is superior at Generating Energy than all other Solar Racking types, all DART units come standard with REI Radiation Tracking controller, Anemometer (Wind Sensor), and Safety Stop Sensors.
Our DART units start Generating Energy from as early as 5:45am ~ 8:30pm, commonly =10+ hours of Peak Generation in Sunlight per Day, and the Further South of the Equator you live, the more Energy a DART unit will generate !
DART-16 Unit can Generates the following Daily Peak Energy;
16x 720W panels (11.52kW) = *110kWh/p Energy per Day.
16x 600W panels (9.60kW) = *96kWh/p Energy per Day..
(*) /p = "Peak Energy", in other words the Solar Panels are exposed to 10hours Full Sunlight per day.
A DART-16 Unit Generates enough energy per day to make a large Residential or Semi-Commerecial business energy independent, when incorporated with the correct sized Energy Storage.
2026 DART-16 Racking Design.
9" Double Slew Drive & Racking.
The Main Mast Dimensions.
Dimensions for 600W Panels.
Solar Panel Beams.
Beam connection to H-purloins.
Solar Panels Retaining Clamps.
Solar Panels Retaining Clamps.
Double Flanged Foundation Poles, before being Hot Dipped Galvanised.
The Rotation of a DART Racking.
For those looking to Dig or Auger a minimum 40cm Diameter Foundation Hole for a Double Flanged Foundation Pole, you should allow an additional depth of 30cm, to provide a 30cm Cement Bed below the bottom Flange Plate to take the vertical load of the DART.
It is advisable to install a Earth/Ground spike at the same time, old school would be a Re-bar or Star Picket.